This method works in this situation because the problem occurs only if the device-specific driver replaces the default driver after the device is connected. The 7080 MT specs say the front single audio jack is a. This headset has worked fine on other Mac/PC/XBOX systems. We plugged a V-MODA mic/headset 3.5mm combo connector into the front of the 7080 MT, but only the headphones are detected via Realtek. Windows now selects the device-specific driver instead of the default USB audio 2.0 driver. Optiplex 7080 MT front universal audio jack not detecting mic. You can do this by using the appropriate installer for the device. If the device is not yet connected, install the device-specific driver first.

The problem may not occur if the device is connected to a different USB port. Method 2Ĭonnect the device to a different USB port. In step 2, don't select the Delete the driver software for this device check box. Select and hold (or double-click) the name of the device, and then select Uninstall.To fix this problem, use one of the following methods. Because the new driver does not support the WaveRT port, the system cannot access the driver. Therefore, the operating system assumes that the new driver also supports the WaveRT port.

When the device-specific driver replaces the default driver, the device interface that is created by usbaudio2.sys is still used because the reference strings overlap. However, both drivers use the 'wave' reference string when the device interface is registered. If you cannot hear any audio via your front audio ports and you have a relatively modern system there is a easy fix for the problem. Hardware or software can often be non-compliant. This 'audio not playing' problem occurs because the default USB audio 2.0 driver (usbaudio2.sys) uses the WaveRT port for operation but the device-specific driver does not. The front audio ports on my PC do not work why is this and how can I fix this When things do not work as expected it is often due to standards not being followed. Both the Windows Audio and the Windows Audio End Point Builder services must be running for audio to work correctly. When you select the icon, you receive the following message:Īudio services not responding.

The speaker icon on the task bar is marked with an X mark. In this scenario, the device cannot be used, and the computer does not have sound. The downloaded device driver replaces the usbaudio2.sys driver.Windows then downloads the device-specific driver from Windows Update.The operating system detects the device and loads the standard USB audio 2.0 driver (usbaudio2.sys).You connect a Universal Serial Bus (USB) audio device, such as an audio adapter or USB digital-to-analog converter (DAC), to a Windows 10 Version 1703-based computer for the first time.

Front audio ports not working